Page 41

Myers_Tire_Supply_Catalog

Ultra-High Temperature Truck Valves • Ultra high temperature green grommet • Designed to operate at temperatures over 400° F • Heat resistant cap & core (red collar) For Drop Center Rims With 5⁄8" Hole 24191 With 13˚ Bend 24216 24172 24192 24215 Valve stems used on waste haulers, cement trucks, buses, and other vehicles generating high heat due to operating conditions are vulnerable to leakage at the grommet. The standard Myers valve stem has out-performed most other valves on the market in these applications, but some conditions are even beyond this range. Ultra-high temperature valves designed to operate at temperatures over 400° F. The valve is identified with a green grommet to distinguish it from the imitations on the market. Look for EHA on the valve stem and the green grommet to be sure. Truck Tire Valve Nut Splitter myerstiresupply.com 41 High Temp Brass Valves with Viton O-Rings • May be bent after installation without damaging the O-Ring • Use for high temperature environments No need to replace the valve between tire changes or remove the wheels to re-tighten the valve stem nut. Operating temperature range of -130° F to 400° F. Order No. TR No. Description Effective Length 23048 572 High Temp Valve w/ Viton O-Ring 3 3⁄4" 23049 573 High Temp Valve w/ Viton O-Ring 4 3/8" Truck Tire Valves Important - Bending a valve after it is in the wheel will often ruin the grommet and will cause a valve leak. Order No. TR. No. Mfr. No. Effective Length Height A Height B 24191 572 V-572 3 3⁄4" 24192 573 V-573 4 3/8" 24215 572 with 13° bend .98" 2.75" 24216 573 with 13° bend .98" 3.38" 24172 Ultra High Temperature Grommet - Green Advance Sealing Truck Tire Valve • Combines benefits of an O-Ring & grommet seal • Ideal for bus fleets, trash haulers & cement trucks Provides the benefit of an O-Ring and a grommet seal with the grommet recessed in the valve base High heat conditions damage standard tire valve O-Rings and grommets. This valve features a high temperature sealing cap, short heat resistant core, brass nut, brass ring washer and an ultra-high temperature green ASC grommet recessed inside the base providing a superior seal. For drop center rims with 5⁄8” valve hole and designed to operate in over 400°. Order No. Torque Bend Effective Length 24202 80-125 Inch Pounds 13° 3 3⁄4" Preset Truck Valve Torque Wrenches Use for fast, accurate torquing of truck valve nuts. Over-torquing or under-torquing may cause valve leaks. Red indicator “pops out” when torque is reached and retracts when removed from the nut. 1-Year warranty. Order No. Use On For Nut Size Pre-Set Torque 07198 570 Series Valves 9⁄16" Hex 42 Inch Pounds 07200 540 & 550 Series Valves 5⁄8" Hex 100 Inch Pounds B A Valve Hole Cleaning Brushes 42058 For .453" Valve Hole 42059 For 5/8" Valve Hole Order No. Description 42058 Valve Hole Cleaning Brush for .453 Valve Hole 42059 Valve Hole Cleaning Brush for 5/8" Valve Hole Splits the brass nuts on 570 series valves. A strike with a hammer neatly splits the nut freeing the valve stem. The slot side of the tool allows it to be used with bent valves. Order No. Mfr. No Description 27150 X10-NS58B Valve Nut Splitter for Truck Valves


Myers_Tire_Supply_Catalog
To see the actual publication please follow the link above