Page 322

Myers_Tire_Supply_Catalog

Patch Rubber Extruder Ropes Clean Out Rope for Extruder Guns CAUTION: Clean extruder guns thoroughly if unused for 20 minutes. Operation with cured rubber in the barrel may cause the extruder to bind resulting in severe damage. Extruder clean out rope will not cure. It is used at the end of the shift to flush out all the regular extruder rope in the barrel. The next morning, after the extruder gun is heated to operating temperature, the operator feeds regular extruder rope and flushes through the gun until all the white material is ejected through the tip. A 5 lb. carton includes ten 10 ft. rolls of white extruder rope. Order No. Description Ship Wt. 14994 Extruder Gun Clean Out Rope 6 lbs. - 3 kg Black & Tan Rope Rubber Feed Black and Tan Extruder Rope through an extruder gun to form a repair putty. Once it is properly mixed, the repair putty compound chemically cures at room temperature. Apply with Black Repair Cement (16325). Shelf life 6 months. Caution: Use Extruder Clean Out Rope (14994) to push out the mixed Black and Tan compound. Order No. Description Width Inches mm Ship Wt. 18120 Tan Extruder Rope 1/4 6 10 lbs. - 5 kg 18121 Black Extruder Rope 1/4 6 10 lbs. - 5 kg Holland Cloth • Prevents sticking between the heating surface & repair material Calendered starched linen cloth has a high surface glaze and will not flake. Use as a releasing material to prevent sticking between the heating surface and repair material. It improves the flow characteristics of the repair material. Order No. Mfr. No. Description Per Roll Ship Wt. 15013 Holland Cloth 10 Yards x 20" Wide 2 lbs. - 1 kg Extruder Rope • RMA Cure Class 10A/15C • Recommended for final tread applications only All Purpose Extruder Rope. A soft extrudable compound that eliminates air pockets, flows easily into contours and crevices of buzz-outs. Made with Fast Cure material. Consistent quality reduces gun maintenance problems. Cure rate 8 minutes at 280°F, 15 minutes at 260°F. Shelf life 90 days. Use with Black Brush Type Cement. *See below for export shipment. (Sold per lb. in 30 lbs increments) Order No. Description 18122 Extruder Rope - Box 3/8" 10 Must order in 30 lb. Increments 98524 Extruder Rope - Spool 3/8" 10 Must order in 30 lb. Increments Tread Rope • RMA Cure Class 20A/35C • Recommended for final tread applications only Width Inches mm Ship Wt. Formulated to provide a finished repair with tread rubber qualities yet is still easily processed through the extruder gun. Cure rate 20 minutes at 280°F, 35 minutes at 260°F. Shelf life 1 year. Use with Black Brush Type Cement (16325). Order No. Description Inches mm Ship Wt. 18118 Tread Rope / Box 3/8" 10 Must order in 30 lb. Increments Giant Tire Extruder Rope • RMA Cure Class 12A/18C Width A custom formulated extruder rope for OTR tire repairs. Giant Tire Extruder Rope bridges the gap between standard extruder rope and tread rope. One rope for both uses. Cure rate: 8 min/280°F, 15 min/260°F. Shelf life 6 months. Use with Black Brush Type Cement, see page 273. Order No. Description Width Inches mm Ship Wt. 18116 Giant Tire Extruder Rope 3/8" 10 30 lbs. - 14 kg *ATTENTION: International Customers - FRT EXPORT Most repair materials listed are either Fast Cure10A/15C (3 month shelf life) or Regular Cure 20A/35C (1 year shelf life). Due to shelf life consideration for export shipments, The Patch Rubber Company provides our Fast Cure material in a special international cure rate (FRT 15A/20C). This FRT cure material will provide extended shelf life over Fast Cure material and still enable the end user to have reduced cure cycles when compared to regular cure materials. Minimum order 500 Lbs. 322 1-800-998-9897 • sales@myerstiresupply.com


Myers_Tire_Supply_Catalog
To see the actual publication please follow the link above